Fork me on GitHub

Project Notes

#060 Breadboard 5V Regulated Power Supply

An LM7805-based 5V regulated power supply for use in breadboard projects.

Notes

See LM7805 5V Regulated Supply for a more detailed investigation of the 7805 voltage regulator.

The LM7805 provides regulated 5V, ideal when current requirements are moderate (up to 1A with heatsink).

This project puts a 5V regulated supply on a protoboard that is designed to plug into a standard breadboard with power rails.

It includes high and low frequency smoothing capacitors, and a master power switch and LED power indicator.

The LED indicator is provided on the regulated supply-side. The 3mm green LED has a forward voltage drop of about 2.2V, so a 1kΩ current-limiting resistor was selected to keep current draw approx 2.8mA.

Given that commercial units can be obtained for as low as 0.80USD (with free shipping!), I’m not sure if I saved any money. But it is more satisfying this way;-)

Construction

The Breadboard

The Schematic

The Build

Protoboard layout Build

Credits and References

About LEAP#60 Power
Project Source on GitHub Return to the LEAP Catalog

This page is a web-friendly rendering of my project notes shared in the LEAP GitHub repository.

LEAP is my personal collection of electronics projects, usually involving an Arduino or other microprocessor in one way or another. Some are full-blown projects, while many are trivial breadboard experiments, intended to learn and explore something interesting (IMHO!).

The projects are usually inspired by things found wild on the net, or ideas from the sources such as:

Feel free to borrow liberally, and if you spot any issues do let me know. See the individual projects for credits where due. There are even now a few projects contributed by others - send your own over in a pull request if you would also like to add to this collection.